A SERVICE OF

logo

99-00539-00 Rev B0 Installing an X-Port 20 Switch in a 2000i 3
5. Carefully swing the electronics tray down so it hangs vertically.
Open Electronics Tray
6. Familiarize yourself with the components of the supplied X-Port 20 switch. In particular, take note of the I²C input jacks and the
gender changer on the left side of the bottom card.
Components of the X-Port 20 Switch
IMPORTANT
It is important to preserve the configuration of the X-Port 20 switch.
Do not remove the ribbon cable, gender changer or separate the two cards.
Electronics Tray
(Open Position)
Rear View of 2000i with
Back Legs Removed for Clarity
Serial OUT
Ribbon Cable
(Installed on
Bottom Card)
Guest Laptop Video IN (Top Card)
Guest Laptop DB9 Serial IN (Bottom Card)
I²C Input Jacks
(Top and Bottom
Cards)
Serial IN
Gender Changer
(Installed on
Bottom Card)
Top Card
Bottom Card
Video OUT
(Top Card)
Video IN
(Top Card)