7
Environment
1. Do not dispose of electric tool, accessories and
packaging together with household waste material.
2. The vibration emission level has been measured in
accordance with a standardized test given in EN/
ISO 3744; it may be used to compare one tool with
another and as a preliminary assessment of exposure
to vibration when using the tool for the applications
mentioned.
• Using the tool for different applications, or poorly
maintained accessories, may signicantly increase the
exposure level.
• The times when the tool is switched off or when it is
running but not actually doing the job, may signicantly
reduce the exposure level.
mWARNING! Protect yourself against the effects of
vibration by maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
Service and Support
If your Snow Joe blower/vacuum requires service or
maintenance, please call 1-866-766-9563 for assistance.
Model and Serial Numbers
When contacting the company or reordering parts, you
will need to provide the model and serial numbers of your
products. These are found on the decal afxed to the housing
or at the bottom of your blower/vacuum/leaf shredder. Copy
these numbers into the space provided below.
The blower/
vacuum/leaf
shredder fails to
operate
The blower/
vacuum/leaf
shredder operates
intermittently
No/low blowing
power
No/low vacuuming
power
• No power supply
• Plug not connected
• Extension cord damaged
• On/off switch defective
• Worn carbon brushes
• Defective motor
• Blowing/vacuum tube not completely mounted
• On/off switch defective
• Internal wiring defective
• Impeller blocked by foreign object
• Selector switch in blowing mode
• Collection bag is full.dirty
• Vacuuming opening clogged up or blocked by
foreign object
• Selector switch in vacuuming mode
• Check power supply (power cable, circuit breakers, fuses).
• Connect the plug
• Replace extension cord
• Contact dealer/service station
• Mount two-part blowing/vacuum tube
• Contact dealer/service station
• Remove blockage
• Set selector switch in vacuuming mode
• Empty/clean collection bag
• Remove blockage
• Set selector switch in blowing mode
Problem
Cause
Remedy
Troubleshooting
m
WARNING! Always unplug the power cord before performing any adjustments, maintenance, or repairs to your
blower/vacuum.
Record the following numbers from the housing or handle of your
new product:
S B J 6 0 4 E
Model #:
Serial #:
