A SERVICE OF

logo

Page 12 Apply Power
Apply Power
1. Connect the AC plug to the power supply.
2. Plug one end of the power supply to the back of the SonicWALL TZ 180.
3. Connect the AC plug to an appropriate power outlet.
The Power LED on the front panel lights up green and the Test LED
lights up and blinks while the appliance performs a series of diagnostic tests.
When the Test LED is no longer lit, the SonicWALL TZ 180 is ready for
configuration. If the Test LED stays lit for more than a few minutes, cycle power
to the SonicWALL.
To SonicWALL TZ 180
To AC power
321 Power