12
GB
Recording into a new group
You can create new groups by CD album or
artist, etc.
1 Do steps 1 to 4 of “Recording to an MD”
on page 10.
2 Press GROUP ON/OFF.
The GROUP ON/OFF button lights up.
3 Press REC z.
“New Group” flashes and the deck changes
to recording pause.
4 Do steps 6 to 7 of “Recording to an MD”
on page 10.
To continue and record into another new
group, press x repeatedly after the
recording to display the disc name and the
total number of groups, then do steps 3 and
4.
If “Group Full!” appears when you
press REC z to start recording
You cannot start recording because there is
insufficient character space for group
management.
Delete unnecessary characters (disc name or
track names) until group recording is possible
(see “Erasing a track or disc name” on page 33).
Notes
• The new group is added after any existing groups
with tracks registered into them.
• Up to 99 groups can be registered on a single MD.
• If “Group Full!” appears while recording, track
numbers are not marked.
Recording into an existing
group
You can add tracks to an existing group.
1 Do steps 1 to 4 of “Recording to an MD”
on page 10.
2 Press GROUP ON/OFF.
The GROUP ON/OFF button lights up.
3 Press GROUP SKIP repeatedly until the
group you want to record in appears.
4 Press REC z.
“New Track” flashes and the deck changes
to recording pause.
5 Do steps 6 to 7 of “Recording to an MD”
on page 10.
If “Group Full!” appears when you
press REC z to start recording
You cannot start recording because there is
insufficient character space for group
management.
Delete unnecessary characters (disc name or
track names) until group recording is possible
(see “Erasing a track or disc name” on page 33).
Notes
• The recorded track is added to the end of the group.
• When you newly record a track into an existing
group, the track numbers following the newly
recorded track may change when the Group function
is turned off.
• If “Group Full!” appears while recording, track
numbers are not marked.
