– 11 –
* Remote commander display during automatic adjustment
4. If result of automatic adjustment is OK, the following display
appears.
5. If result of automatic adjustment is NG, the following display
appears.
* If NG, enter servo mode to perform automatic adjustment of the
item determined as NG.
057
Adjustment value (flashing)
Mode No. under adjustment
051
NG
Error code
NG mode No.
• In MO Automatic adjustment Mode
No. Mode Description
1 061 Sled in
2 071 Focus search
3 062 Sled out
4 031 MO EF balance
5 032 MO EF gain
6 031 MO EF balance
7 033 MO ABCD gain
8 034 MO focus gain
9 035 MO tracking gain
10 036 MO RF gain
11 037 MO ADIP gain
12 039 MO focus bias A
13 073 ADER check
14 071 Focus search
15 031 MO EF balance
16 032 MO EF gain
17 031 MO EF balance
18 033 MO ABCD gain
19 034 MO focus gain
20 035 MO tracking gain
21 036 MO RF gain
22 037 MO ADIP gain
23 039 MO focus bias A
24 073 ADER check
25 061 Sled in
26 071 Focus search
27 041 Low reflection CD EF balance
28 042 Low reflection CD EF gain
29 041 Low reflection CD EF balance
30 043 Low reflection CD ABCD gain
31 044 Low reflection CD focus gain
32 045 Low reflection CD tracking gain
33 046 Low reflection CD RF offset
34 047 Low reflection CD RF gain
35 061 Sled in
36 071 Focus search
37 041 Low reflection CD EF balance
38 042 Low reflection CD EF gain
39 041 Low reflection CD EF balance
40 043 Low reflection CD ABCD gain
41 044 Low reflection CD focus gain
42 045 Low reflection CD tracking gain
43 046 Low reflection CD RF offset
44 047 Low reflection CD RF gain
