3 (E)
Overview
The PFV-L10 Interface Unit is an apparatus for
interfacing various kinds of equipment to process
analog and digital video and audio signals. The unit is
composed of a power block, a main board and then
slots to accommodate optional boards .
When an optional board is installed in one of the slots,
the power is supplied from the PFV-L10 to the board,
and the functions of the board are activated. Select the
appropriate optional boards and install them into the
PFV-L10, allowing the unit to execute various signal-
processing functions.
Features
Various kinds of signal processing with
optional boards
With the appropriate optional boards installed, various
functions regarding serial digital video signals can be
processed in a single PFV-L10 unit.
Up to then boards can be installed in combination in
the PFV-L10.
For the optional boards, see the next section.
Reliable operation assured by two AC lines
A pair of built-in power supply units enable the PFV-
L10 to be supplied with power from two separate lines.
If one of the power blocks stops supplying power, the
other block will supply full power. Thus, highly
reliable operation is maintained.
Rack mounting
The unit can be mounted in a standard 19-inch rack.
To mount the unit to the rack, the RMM-10 Rack
Mount Kit is necessary. For mounting the RMM-10,
consult your Sony service personnel.
Optional Boards
Select boards with the required functions, and install
them in slots of the PFV-L10.
BKPF-L601C A/D Converter
This board converts the analog component video
signals (Y, R-Y, B-Y) or the RGB signals to the digital
signals, and supplies them as four lines of the 4:2:2
component serial digital video signals.
BKPF-L602C Video D/A Converter
This board converts the 4:2:2 serial digital video signal
to analog signals, and supplies them as the G/B/R/
SYNC or Y/B-Y/R-Y/SYNC signals.
BKPF-L603 SDI Distributor
This board distributes a composite or component serial
digital video signal to eight outputs.
BKPF-L605 Audio/Video Multiplexer
(Component/NTSC Composite)
This board multiplexes AES/EBU-format digital audio
signals to a serial digital video signal.
BKPF-L606 Audio/Video Demultiplexer
(Component/NTSC Composite)
This board demultiplexes AES/EBU-format digital
audio signals from a serial digital signal, and outputs
the demultiplexed audio signal and the input serial
digital signal as is.
BKPF-L608C Frame Synchronizer Board
This board has a function to synchronize 4:2:2
component serial digital video signals with the
reference audio signal.
BKPF-L611 3-ch SDI Distribution Board
This board accepts three input signals, each of which is
divided into two and output. The unit conforms to five
signal formats: 540 Mbps, 360 Mbps, 270 Mbps (4:2:2
SDI), 177 Mbps (4fsc PAL SDI), and 143 Mbps (4fsc
NTSC SDI).
BKPF-L612 2-ch SDI Distribution Board
This board accepts two input signals, each of which is
divided into four and output. The unit conforms to
five signal formats: 540 Mbps, 360 Mbps, 270 Mbps
(4:2:2 SDI), 177 Mbps (4fsc PAL SDI), and 143 Mbps
(4fsc NTSC SDI).
