20
Presetting channels
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (RÉGL.FIN)
function. After step 4, press M/m to select RÉGL.FIN. Press </, to get a
clear picture, then press MENU to exit the menu.
Tip
• To set the programme position for the decoder, see “Setting the Canal Plus
channels” on page 26.
Note
• When adjusting RÉGL.FIN, the menu may become difficult to read due to
interference from the picture being received.
8
Enter the station name.
1 Press M/m to select a character.
Each time you press M, the character
changes as shown below.
A t B t … t Z t 0 t 1 t
… t 9 t A
2 Press , to set the next
character.
The next space is flashed.
To correct a character, press </, until the character you want to
correct is flashed, then reset it.
You can set up to 4 characters for the station name.
9
Press OK to confirm the station name.
10
Press MENU to exit the menu.
OK
LECTURE
SYS. : L / L’
ST
RÉGL.FIN
DECODEUR
: –
: NON
:5
: 033
:O–––
MENU:OK:FIN
SÉLECT.
CANAL
NOM
:
SORTIE
RECHERCHE MANUELLE
RÉGLER :
OK
LECTURE
MENU
