Section 1C: Installing the Sprint PCS Connection Card 21
3. Click “Safely remove NEC PCI to USB Open Host
Controller”. A dialog box notifies you that it is safe to
remove the card.
Ⅲ
Windows 2000: Once the Safe to Remove Hardware
message appears, click OKand use the ejector
button (most laptops have a ejector button located
next to the PC Card slot) to remove the card.
Ⅲ
Windows XP: Once Safe to Remove Hardware
message appears in the system tray, use the ejector
button (most laptops have a ejector button located
next to the PC Card slot) to remove the card.
4. Remove the Sprint PCS Connection Card from your
computer’s PC Card slot by gripping the card by both of
its sides and pulling straight out. (If available, use your
computer’s card ejector tool).
Installing Your Card
Correct
Incorrect
When inserting or removing your
Sprint PCS Connection Card, grip
the card by both of its sides.
Do not handle or remove the
Sprint PCS Connection Card by
pulling on the antenna.
Sprint_PC5740 (083105).qxd 9/23/2005 3:41 PM Page 21
