Printer beep tones
The printer beeps both to warn you that something is
wrong and to indicate various aspects of normal opera-
tion, for example, to indicate that a particular setting or
selection has just been made. The table below gives a
full list of printer beeps and their meanings
Tone sequence
Meaning
Single tone lasting 2 seconds
The printer hasdetected an error condition. Switch
the printer off and on again.
Single tone lasting several
The printer hasdetected an error condition. Switch
seconds
the printer off and on again.
Four short tones, repeated
The printer is out of paper
twice
Single short tone
One of the following:
● Vertical alignment mode has been selected
● Zoom resolution has been set to 50~0
● Quiet
mode has been selected
● Electronic DIP Switch mode hasbeen selected
Two short tones
One of the following:
● Macro (savedsettings) mode has been selected
● Zoom resolution has been set to 67Y0
● Quiet mode has been cancelled
Three short torfes
Macro (savedsettings) mode has been cancelled
Single quarter tone
One of the following:
● Hexadecimal dump mode has been selected
.
Prevention of software font selection has been
selected
● Zoom resolution has been set to 10OYO(i.e.
zoom is canceled).
Page150
