Page 9 of 24 Form 0151E 3815 03/29/2007 Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Flashpaq.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
6. Quick Start – Program my vehicle with User Options NOW!!!
Please follow the steps below to program your vehicle
*** Press DOWN to scroll as needed ***
From the opening screen
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Follow ON SCREEN – Vehicle Ignition Switch ON/OFF/ON
(DO NOT START VEHICLE!!)
5) Press EXIT – returns you to the previous screen
From this screen
1) Press ENTER – after selection of Change Setup
2) Press ENTER – after selection of Power Level
3) Press SAVE – after selection of the highlighted tuning level
4) Press ENTER – after selection of Options
5) Press ENTER – after selection of Rev Limiter
6) Press Minus/Plus & SAVE – adjusts Rev Limiter
7) Press ENTER – after selection of Speed Limiter
8) Press Minus/Plus & SAVE – adjusts Speed Limiter
9) Press ENTER – after selection of Tire Size
10) Press Minus/Plus & SAVE – adjusts Tire Size Height
11) Press EXIT – returns you back one screen
From this screen
1) Press ENTER – selects Program Vehicle
2) Follow ON SCREEN – Vehicle Ignition Switch ON/OFF/ON
(DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle.
Your vehicle is now programmed with Superchips and user options!
You may now start your vehicle.
Page 10 of 24 Form 0151E 3815 03/29/2007 Superchips Inc
.
Superchips Inc. 1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Flashpaq.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Section A – Overview of
FLASHPAQ
7. Quick Start – Return my vehicle to factory stock NOW!!!
Please follow the steps below to program your vehicle
*** Press DOWN to scroll as needed ***
From the opening screen
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Change Setup
3) Follow ON SCREEN – Vehicle Ignition Switch ON/OFF/ON
(DO NOT START VEHICLE!!)
4) Follow ON SCREEN – Vehicle Ignition Switch ON/OFF/ON
(DO NOT START VEHICLE!!)
5)
5) Press ENTER – after selection of Power Level
6) Press SAVE – after selection of the highlighted tuning level
7) Press EXIT – returns you to previous screen
From this screen
1) Press ENTER – after selection of Program Vehicle
2) Follow ON SCREEN – Vehicle Ignition Switch OFF/ON
(DO NOT START VEHICLE!!)
Upon completion, remove cable from vehicle.
Your vehicle’s program is now returned to factory stock. You may
now start your vehicle.
