TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications
15 TEAC Corporation
4-23. TIME DATA SEND SELECT
Sets the Time mode of the time data that is sent out from the controlled device automatically (without
any request command).
When this command is transmitted with request data [FF], the controlled device returns the TIME DATA
SEND SELECT RETURN command [BF].
When specified data includes “Without Frame” information, frame information will not shown on the
display of the controlled device.
Command 3F
Data 2 bytes
Return TIME DATA SEND SELECT RETURN [BF]
Data 1 Data 2 Description Remarks
0 0 Off Time data (TIME DATA [88]) will not be sent
out from the controlled device automatically
0 1 Elapsed Time With frame data
0 2 Remain Time With frame data
0 4 Total Remain Time With frame data
1 1 Elapsed Time Without frame data
1 2 Remain Time Without frame data
1 4 Total Remain Time Without frame data
F F Time Data Send status request Requests the Output Time Data status
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
4-24. PLAY MODE SELECT
Sets the Play mode.
The status of the PLAY mode can be requested using the PLAY MODE SENSE command [4E].
Command 4D
Data 2 bytes
Return None
Data 1 Data 2 Description Remarks
0 0 Normal Play Sets the Play Mode to normal (continuous) play mode
0 1 Single Play Sets the Play Mode to single play mode
0 2 Program Play Sets the Play Mode to program play mode
0 3 Random Play Sets the Play Mode to random play mode
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
4-25. PLAY MOSE SENSE
Requests the status of the Play mode.
The contents of the reply are described in the PLAY MODE RETURN command.
Command 4E
Data None
Return PLAY MODE RETURN [CE]
4-26. MECHA STATUS SENSE
Requests the status of the mechanism.
The contents of the reply are described in the MECHA STATUS RETURN command.
Command 50
Data None
Return MECHA STATSU RETURN [D0]
