Playing a slideshow
There are two ways of playing a slideshow:
1 Press the (
) or ( ) buttons to select a memory device (USB
or SD/MMC/MS card) in the main menu, and then press the ()
button. The DPF will start a slideshow from the memory device
connected.
2 Press the (
) or ( ) buttons to select Now Playing in the
main menu, and then press the () button. The DPF will start a
slideshow from the memory device connected..
When you enter the slideshow mode, the following menu is •
temporarily shown on the bottom of the screen:
Press the (• ) button to see a preview of all the photos in the
folder (refer to Viewing thumbnails on page 10).
Use the (•
) or ( ) button to move to the previous or next
photo.
To rotate a photo, press the (•
) button, the options are:
once = 90°
twice = 180°
three times = 270°.
NOTE:
If there are memory devices inserted in the DPF before it is •
switched on, the frame will automatically start to play a slideshow.
Using the OSD menu
You can use the OSD menu to manually view the photos one by one.
1 Press the () button during viewing a photo or slideshow. The
OSD menu appears on the screen and slideshow pauses.
The following menu will also be shown:
2 Press the ( ) or ( ) button to navigate between the icons on
the OSD menu.
To start or resume slide show from the current photo, highlight •
() and press the () button. The () icon is changed to (ll)
icon or vice versa.
To skip to previous or next photo, highlight (•
) or ( ), and then
press the () button.
Page 9
