Operating Instruction Book
TU-HDT104A
21
Digital Audio
For each Audio Mode, you can have different Digital Audio Selection Options. (Refer
to Table 2, Digital Audio Selection Table)
Table 2: Digital Audio Selection Table
Default Audio Mode Digital Audio Selection Options
AC-3
1. Bitstream
2. PCM (stereo)
3. Off
MPEG-2 Same as above
MPEG-1
1. PCM (stereo)
2. Off
*Bitstream: select this if your TV or A / V receiver has a digital audio input and can decode
Dolby Digital
*PCM (stereo): select this if your TV or A / V receiver has a digital audio input but can not
decode Dolby Digital
*Off: select this if you want the digital audio output to mute when a Dolby Digital program is
being received.
Downmix-Surround
You can toggle Downmix-Surround on or off by pressing W/X and OK.
On: Surround information will be included in stereo output (Lt/Rt)
Off: Pure stereo audio output (L/R)
Audio Balance
You can adjust the value from L+7 to R+7. The selection “0” means balanced (equal
level) output on the two front speakers.
Select Output Format
After the initial format setting procedure,
the output format still can be changed
according to your preference. The formats
you are allowed to select depend on the
initial format checking process, that is, only
the formats that your display device
supports.
