- 142 -
6.3.15 Feed Command [ESC] T
Function Feeds the paper.
Format [ESC] Tabcde [LF] [NUL]
Term a: Type of sensor
0: No sensor
1: Lower reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using preprinted labels)
4: Lower reflective sensor (when using a manual threshold value)
5: Upper reflective sensor (for detecting black marks on the print side of label)
6: Lower reflective sensor (for detecting marginal punched holes on the fanfold
paper)
b: Selects cut or non-cut
0: Non-cut
1: Cut
c: Feed mode
C: Batch mode (Cut and feed when “Cut” is selected for parameter b.)
D or E: Strip mode for auto labeler
NOTE: To perform the strip issue for the auto labeler, the backing paper
rewind system and the control unit are required on the auto labeler as
external equipment.
d: Feed speed
2: 2 inches/sec
4: 4 inches/sec
e: With/without ribbon
0: Without ribbon
1 or 2: With ribbon
Explanation (1) Type of sensor
c No sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command.
d Lower reflective sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the black mark provided on the back of the tag paper
is automatically sensed by the lower reflective sensor and the stop position is
finely adjusted.
e Transmissive sensor (when using normal labels):
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the label-to-label gap is automatically sensed by the
transmissive sensor and the stop position is finely adjusted.
