25
䟺
䟺䟺
䟺4䟻
䟻䟻
䟻 PROCESS
Gamma correction ON, OFF
Gamma correction level setting -10 to 10
-- 4 PROCESS -- <FILE A>
GAMMA ON/OFF ON
GAMMA 0
Detail gain setting -7 to 7
DTL GAIN 0
Master pedestal setting -200 to 200
M
PED 0
R
PED 0
Digital noise reduction ON,OFF
B
PED 0
DNR OFF
R
PED 0
B
PED 0
DNR OFF
䟺
䟺䟺
䟺4䠀
䠀䠀
䠀1䟻
䟻䟻
䟻 Changing gamma correction ON/OFF
䐖 Move the “䊲” to GAMMA ON/OFF by pushing [MENU UP], [MENU DOWN] buttons.
䐗 Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
Gamma correction ON, OFF
-- 4 PROCESS -- <FILE A>
Detail gain setting -7 to 7
GAMMA ON/OFF OFF
DTL GAIN 0
M
PED 0
Master pedestal setting -200 to 200
Digital noise reduction ON,OFF
Red pedestal setting -100 to 100
Blue pedestal setting -100 to 100
Red pedestal setting -100 to 100
Blue pedestal setting -100 to 100
Menu when GAMMA OFF is selected.
䟺
䟺䟺
䟺4䠀
䠀䠀
䠀2䟻
䟻䟻
䟻 Changing gamma correction level
䐖 Move the “䊲” to GAMMA by pushing [MENU UP], [MENU DOWN] buttons.
䐗 Select the desired value of gamma correction level by pushing [DATA UP], [DATA DOWN] buttons.
䠭DATA UP䠯 Correction amount becomes larger.
䟿10 0 10
Correction amount becomes smaller. 䠭DATA DOWN䠯
* When OFF is selected in GAMMA ON/OFF selection line, the gamma correction level change cannot
be changed.
Move up and down
by pushing
MENU UP,DOWN
Select the desired
value by pushing
DATA UP,DOWN
Move up and down
by pushing
MENU UP,DOWN
Select the desired
value by pushing
DATA UP,DOWN
When ON is selected, menu will show the GAMMA and BLACK GAMMA selections. When OFF is selected,
GAMMA and BLACK GAMMA are not displayed. So the setting for GAMMA and BLACK GAMMA cannot be
made.
