APPENDIX 4 SYSTEM MODE
EO1-33032
A4.5 Printer Parameter Fine Adjustment
A4- 9
A4.5 Printer Parameter
Fine Adjustment
(Cont.)
Back Feed Length Fine Adjustment
With this parameter you can fine adjust the Back Feed Length. With
“<3>ADJUST SET” displayed, press the
[PAUSE]
key 3 times.
[FEED]
key: Pressing the
[FEED]
key once causes a –0.5mm
change, down to –9.5 mm.
[RESTART]
key: Pressing the
[RESTART]
key once causes a
+0.5mm change, up to +9.5 mm.
After completing the fine adjustment, press the
[PAUSE]
key.
NOTE:
The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
arameter.
The maximum back feed length
ine adjustment value is
±9.5mm. When the addition of
the values reaches the
maximum, the value remains
unchanged even if subsequent
ine adjustments are made.
Back Feed Length Fine Adjustment
(Example)
[RESTART]
[FEED]
