21
Connections
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure
to turn off the power and unplug both units from the wall outlet
before making any connections.
• If you have a HDMI (with HDCP) equipped monitor or display,
you can connect it to this player using a HDMI cable.
• The HDMI connector outputs uncompressed digital video, as
well as almost every kind of digital audio that the player is
compatible with, including DVD-Video, Video CD/Super VCD,
CD and MP3.
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface) Version 1.1 depending on the
component you have connected. Using a HDMI connection
may result in unreliable signal transfers.
• When using HDMI cable, do not connect to other analog video
outputs.
• No sound will be output from the HDMI cable if the digital out
is not set to PCM
61
.
• HDMI output is only available when the Video Output is set to
“HDMI”. Otherwise the HDMI button is invalid
59
.
Content of the output for each output jack is shown in the followin
table
and differ dependin
on the On-Screen Display Settin
:
"Video Output" HDMI Output HDMI Video Component AV
Setting Setting * Output Output Output Output
RGB Invalid - Composite - RGB
Composite Invalid - Composite - Composite
Component Invalid - Composite 576i Composite
(Interlaced)
P-Scan Invalid - Composite 576p Composite
(Progressive)
576p 576p Composite 576p Composite
HDMI 720p 720p - - -
1080i 1080i - - -
* Settin
s for HDMI output format are performed usin
the HDMI button
on the remote control.
Content of output for each output jackOn-Screen Display Setting
