40
Recall
Menu
Using the TV’s
Features
Resetting your audio adjustments
The RESET function returns your audio adjustments to the following
factory settings:
Bass ................. center (25)
Treble ............... center (25)
Balance .............. center (0)
To reset your audio adjustments:
1. Press MENU, then press
or to display the AUDIO menu.
2. Press ▲ or ▼ to highlight RESET, and then press
.
Checking the digital signal strength
You can check the strength of the digital signal by viewing the digital
signal meter.
To view the digital signal meter:
1. Press MENU, then press
or to display the SETUP menu.
2. Press ▲ or ▼ to highlight SIGNAL METER.
3. Press
or to check the digital signal strength.
4. Press EXIT to return to the normal screen.
Displaying TV status information on-screen
Press RECALL to display the following information on-screen:
Analog channel:
• Clock
• Channel number or VIDEO mode
selected
• Channel label (if set)
• Stereo or SAP (second audio
program) audio status
• Content rating
• On timer, Off timer, GameTimer,
Sleep timer (if set)
• Picture size
Digital channel:
• Clock
• Channel number, station name,
program name
• Remaining time
•Audio language
• Content rating
• HD or SD mark
• Closed Caption mark
•V-Chip mark
STEREO
SAP
TV-PG L V
ON TIMER 12:00AM
OFF TIMER 12:00PM
SLEEP TIMER 2h00m
GAME TIMER 30m
ANT
ABCD
CABLE
NATURAL
CLOCK 12:00AM SUN
007
SIGNAL METER
CHANNEL (DIGITAL)
1-001
80
Note:
• The signal meter feature is not available for
analog channels.
• After approximately 4 minutes, the SIGNAL
METER screen will return to normal TV-
operation automatically.
• When you select a vacant channel, the
signal meter may react.
Note:
• Analog channel status will display on the
screen for approx. 4 seconds.
• Digital channel status will display on the
screen for approx. 10 seconds. Press
RECALL again, the analog channel status
will display.
Exit
J3W60321A_En_p38-Back 27/2/06, 9:56 AM40
