A SERVICE OF

logo

15.2.3 NTDP Config
On this page you can configure NTDP globally.
Choose the menu ClusterNTDPNTDP Config to load the following page.
Figure 15-8 NTDP Config
The following entries are displayed on this screen:
¾ Global Config
NTDP: Select Enable/Disable NTDP for the switch globally.
NTDP Interval Time: Enter the interval to collect topology information. The default is 1
minute.
NTDP Hops: Enter the hop count the switch topology collects. The default is 3
hops.
NTDP Hop Delay: Enter the time between the switch receiving NTDP request
packets and the switch forwarding NTDP request packets for the
first time. The default is 200 milliseconds.
218