A SERVICE OF

logo

12
TRAXXAS
ESC/Motor Wiring Diagram
Your model is equipped with the newest TQi 2.4GHz transmitter
with Traxxas Link
Model Memory. The transmitter has two
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.
MODEL WIRING DIAGRAM
to Motor
LED
EZ-Set Button
(On/Off Button)
Heat Sink
VXL-3s ELECTRONIC SPEED CONTROL
Traxxas High-Current
Connector (Male)
to Battery
Receiver cable
(RX wire)
Cooling Fan
Connector
(for optional use)
TRANSMITTER AND RECEIVER
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Throttle Neutral
Adjust
Steering Wheel
Power Switch Battery Compartment
Set Button
Menu Button
Red/Green Status LED
see page 27 for more info
Link
Button
LED
Sensor Expansion
Port
**
TRAXXAS TQ
i
RADIO & VELINEON POWER SYSTEM
V/T - Voltage/Temp Senor Port**
RPM - RPM Sensor Port**
BATT/
CH5 - Battery/Channel 5*
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Channel 1*
* Not used ** Accessory sensor port for use with TQi Docking Base
(see Traxxas.com and included materials for more information)
Traxxas High-Current
Connector (Male)
to Battery
Brushless Motor
(see sidebar for proper
motor wiring)
Channel 1
Steering Servo
Channel 2
Electronic Speed Control
Cooling Fan
Connector
(for optional use)
Antenna
Motor Cap
Velineon 3500 Specs
Type: Sensorless brushless
RPM/volt: 3500
Magnet type: Ultra High-
Temperature Sintered
Neodymium
Connection type : 3.5mm bullet
Wire size: 12 Gauge
Max RPM: 50,000
Diameter: 36mm (1.42") (540 size)
Length: 55mm (2.165")
Weight: 262g (9.24oz)