A SERVICE OF

logo

Open as PDF
next previous
Microsoft VPN
Figure 57: Modify Security Method
13. On the resulting screen (above), select High [ESP] then click "OK" to save your changes and return to the Require Security
Properties screen.
0
Figure 58: Require Security Properties
14. Ensure the following settings are correct, then click "OK" to return to the Filter Action tab of the Edit Rule Properties screen.
VPN Setting Windows Setting
IKE enabled Negotiate security
AH disabled AH Integrity: <None>
ESP encryption: Enable/DES ESP Confidentially: DES
ESP authentication: Enable/MD5 ESP Integrity: MD5
15. Click the Tunnel Setting tab, then select The tunnel endpoint is specified by this IP address. Enter the WAN (Internet) IP address
of the Broadband VPN Gateway, as shown below.
89