48
Changing the Hotkey:
Bydefault,thehotkeycombinationusedtoopentheOSDis[Shift]+[Shift].YoucanchangethishotkeyintheF2 – SETTING menu to use
any of the following. Note: The left [Shift] hotkey must be used; the right [Shift] key will not work. If you set the hotkey to [Ctrl] + [Ctrl] or
[Ctrl] + [F11], the left [Ctrl] key must be used.
• [Shift] + [Shift]
• [Ctrl] + [Ctrl]
• [Ctrl] + [F11]
• [Print Screen] + [Print Screen]
To change the hotkey:
1. In the F2 - SETTING window, navigate to the Hotkey field.
2. Press the [Spacebar] key to toggle between the available options.
3. After choosing the desired hotkey, press the [Esc] key to exit the F2 – SETTING window.
To change the keyboard language:
Bydefault,thekeyboardlanguageispresettoUSEnglish.YoucanchangethekeyboardlanguagetoFrench(FR)orGerman(DE).Note: This
refers to the OSD keyboard language and not the computer keyboard language.
To change the keyboard language:
1. In the F2 - SETTING window, navigate to the Keyboard Language field.
2. Press the [Spacebar] key to toggle between the available options.
3. After choosing the desired language, press the [Esc] key to exit the F2 – SETTING window.
4. Local Console
Inputing and Updating DDC Information:
Display Data Channel (DDC) is a VESA standard for communication
between a monitor and a video adapter. The SIU emulates the DDC
information to the connected computer. When first installing the
NetCommander IP system, emulate the DDC information of the
connected monitor into the memories of all connected SIUs.
To input the DDC information:
1. In the F2 - SETTING window, press the [F10] key. The text
“Pleasewait”ashesafewtimesanddisappears.Themonitor’s
DDC information is sent to all SIUs.
YoushouldupdatetheDDCinformationinanyofthefollowing
circumstances:
• When replacing the monitor connected to the NetCommander IP
• When adding a new SIU to the system
• When reconnecting an existing SIU that was temporarily used in a
different system
