Tripp Lite B132-004 Manual

next previous

Single-Stage Installation

Note: Test to make sure the entire installation works properly before pulling cables

through ceilings/walls.

 Connectyourcomputertothe

Source

portontheB132-004usinga

VGAcable.

 (Optional)Connectalocalmonitortothe

Local

portontheB132-004

usingaVGAcable.

 ConnectthepowersupplytotheB132-004andplugitintoan

appropriatepowersource.

 ConnecttheB132-004LocalUnittoaB132-100RemoteUnit(sold

separately)orB132-100-WPWallplate(soldseparately)usingCat5e/6

cable.OneB132-100orB132-100-WPisrequiredforeach

Output

port

ontheB132-004LocalUnit.

Note:

Remoteconnectionmethodswill

vary.(SeetheB132-100orB132-100-WPOwner’sManualfordetails.)

 FollowtheinstructionsintheOwner’sManualthatcomeswithyour

B132-100RemoteUnitorB132-100-WPWallplatetocompletethe

installation.

B132-100

B132-004

B132-100-WP