A SERVICE OF

logo

2.3 WIRING DESCRIPTION
The wiring method is described in the following figure:
REAR VIEW
Wiring Instructions:
1. Utility panel circuit breaker required is 30A or larger
2. Utility wire gauge must be 8 gauge or larger.
3. Connect utility per drawing.
4. Connect output load connections and jumper wires for correct voltages per drawings(not used on units without an
isolation transformer; i.e. SG0603 and SG1003).
5. Use proper size AWG wires for all connections.
NOTE: STACO ENERGY PRODUCTS DOES CO. NOT PROVIDE AC OUTPUT
OVERCURRENT PROTECTION. OUTPUT OVERCURRENT PROTECTION IS TO BE
PROVIDED BY THE USER.