CAUTION:
Gas is flammable! Do not smoke!
6.2 Field-stripping the pistol
(4) DO NOT touch the trigger. Pull the trigger guard down as shown
on the illustration. (5) Now fully retract the slide and then lift it off the
receiver as illustrated.
(6) The slide may now be removed from the gun by moving it to the
front (muzzle) side of the pistol.
6.1 Unloading
(1) Remove the magazine. Remove the BBs from the magazine until
the follower is visible at the loading port.
(2) Retract the slide and keep it in its rearmost position. Push the
cleaning rod through the barrel. A BB stuck in the barrel will now
fall out.
(3) To discharge the gas tank, use a pin to press the valve stud until
all gas is discharged.
6.4 Assembly
Make sure that the spring cap has been properly inserted in the slide
(see illustration).
Note: The hammer must be cocked. Now put the slide on the main
spring
as illustrated, push it back and then place it on the receiver.
Now carefully move the slide to the front and lock it with the trigger
guard.
Note: Make sure that the small spring of the slide catch has been
properly
inserted.
6.3 Lubrication
Use
a small amount of gun oil to lubricate the following parts in order
to ensure proper function.
(X) don´t lubricate these parts
Make sure the spring is in
the right place!
2265003_PPKS_man3.indd 8 09.05.2007 09:09:31
