Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. The dishwasher starts filling once you press a cycle pad unless you
select the delay wash cycle. You may press Option pads as the machine is filling.
A “@” shows what each cycle Includes
. CYCLE
MAIN FINAL TIME
CYCLE
WASH RINSE WASH RINSE RINSE DRY
(Minutes)
RINSE/WASH LATER
For rinsing a few items to
be washed one or more
days later.
. .
l Do not use detergent.
12
l Water is not heated
during Rinse/Wash Later.
l Air Dry is automatically selected.
LOW ENERGY/CHINA
Single wash for prerinsed
or lightly soiled loads.
l Select High Temp Wash
to heat water in the main
wash (marked+).
l The water heats to 140°F (60%) in
the final rinse (marked ++).
l t . .+t
.
60*
NORMAL
liil
Double wash for normal,
everyday soiled loads.
(The Energy Guide label is
. .
based on this cycle.)
l Select High Temp Wash
to heat water in the main wash
(marked+).
l
l f . l n . 66*
l The water heats to 140°F (60%) in
the final rinse (marked++).
POTS-N-PANS
iii
Double wash for maximum
cleaning of cooked-on or
. .
baked-on foods.
l The water heats to 140°F l t
.
(60°C) in both washes
(marked +).
l The water heats to 140°F (60%) in
the final rinse (marked++).
l l t
a
l ++ .
76’
’ Cycle time includes dry time and may be longer depending on the temperature of water entering the dlshwashec I he cooler
the water, the longer the cycle time. If Ihe water is already hol enough, the cycle times will be as shown.
13
