A SERVICE OF

logo

8
WO L F MULTI-FUNCTION COOKTOP
INSTALLATION S P E C I F I C ATI O N S
The illustrations below provide the overall
dimensions, installation specifications and
countertop cut-out for Model ICBIM15/S.
If the cooktop is not installed above an oven,
the gas service may be supplied through the
floor. When an oven is installed below the
cooktop, unless you are using cabinets deeper
than 610 mm, it is recommended that the
electrical supply be placed in the base cabinet
to the right of the oven. Refer to the Installation
Specifications illustration below for specifics
on placement of the electrical and gas supply.
IMPORTANT NOTE:
When multiple cooktops
and/or modules are installed side by side, refer
to the countertop cut-out dimensions on page 9.
E
127 mm
G
381 mm
381 mm
381
mm
LOCATION OF GAS SUPPLY
MAY ALSO EXTEND 127 mm ON
FLOOR FROM BACK WALL
178 mm*min
CUT-OUTTO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
356 mm
COOKTOP CUT-OUT
WIDTH
356 mm
COOKTOP CUT-OUT
WIDTH
838 mm
RECOMMENDED
CABINET WIDTH
457 mm
NOTE:Applicationshown allows for installation of two 381 mm modules side-by-side with 838 mm recommended cabinet width. 457 mm
recommended cabinet width for installation of single 381 mm cooktop or module. *Minimum clearance from both side edges of cooktop cut-out
to combustible materials up to 457 mm above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up
to 457 mm above countertop.
489 mm
COOKTOP CUT-OUT
DEPTH
64 mm
min
914 mm
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
330 mm
max
762 mm
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
64**
mm
127
mm
LOCATION OFGAS
SUPPLY MAY ALSO EXTEND
127 mm ON FLOOR
FROM BACK WALL
FRONT OFCOUNTERTOP
64 mm
min
489 mm
COOKTOP
CUT-OUT DEPTH
381 mm
OVERALL WIDTH
533 mm
OVERALL
DEPTH
127 mm
M O D E L IC B I M 1 5 / S D I M E N S I O N S
Overall Width 381 mm
Overall Height 127 mm
Overall Depth 533 mm
Minimum Cabinet Depth 578 mm
Minimum Height Clearance* 127 mm
Cut-Out Width 356 mm
Cut-Out Depth 489 mm
*A minimum height clearance of 140 mm is
required between countertop and any combustible
surface directly below the cooktop.
Unit dimensions may vary to
±
3 mm.
Overall Dimensions
Installation Specifications and
Countertop Cut-Out Dimensions
Model ICBIM15/S