A SERVICE OF

logo

Mount Installation 5
MAN0064 (Rev. 7/20/2007)
Install Right and Left Rear Mounts
1. Attach right rear mount (1) to the tractor clutch
housing using two cap screws (12) and hardened
flat washers (14) in the top holes and two cap
screws (16) hardened flat washers (14) in the
lower two holes.
2. Repeat to install left rear mount (2).
1. 1026490 Right rear mount
2. 1026491 Left rear mount
12. 300517 3/4 NC x 1-3/4 HHCS GR5
14. 57798 3/4 Hardened flat washer
16. 735 3/4 NC x 2 HHCS GR5
Figure 1. Rear Mount Installation
Figure 2. Left rear Mount Installed
14
12
14
16
DP1
(Rev. 05/18/2010)