RESETTING THE SYSTEM
104 En
Use this feature to reset all the parameters of this unit to the initial factory settings.
• This procedure completely resets all the parameters of this unit including the “SET MENU” parameters.
• The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press
C
STANDBY/ON on the front panel.
1 Press
C
STANDBY/ON on the front panel to
set this unit to the standby mode.
2 Press and hold
D
TONE CONTROL and
then press
C
STANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3 Rotate the
E
PROGRAM selector to select
“INIT”.
4 Press
D
TONE CONTROL repeatedly to
select “ALL”.
y
Select “CANCEL” to cancel the initialization procedure
without making any changes.
5 Press
C
STANDBY/ON to confirm your
selection and set this unit to the standby
mode.
Resetting the system
Notes
TONE CONTROL
STANDBY
/ON
While holding
down
01EN_00_DSP-AX763_B.book Page 104 Thursday, January 31, 2008 9:41 AM
