A SERVICE OF

logo

3 - 33
CHK
ADJ
CHECKING THE SPARK PLUGS/
CHECKING THE IGNITION TIMING
5. Check:
electrodes 1
Damage/wear Replace the spark plug.
insulator 2
Abnormal color Replace the spark plug.
Normal color is medium-to-light tan.
6. Clean:
spark plug
(with a spark plug cleaner or wire brush)
7. Measure:
spark plug gap a
(with a wire gauge)
Out of specification Regap.
8. Install:
spark plug
NOTE:
@
Before installing the spark plug, clean the
spark plug and gasket surface.
9. Connect:
spark plug cap
10.Install:
T-bar
fuel tank
•rider seat
Refer to “SEATS AND FUEL TANK”.
Spark plug gap
0.7 ~ 0.8 mm
T
R
.
.
13 Nm (1.3 m · kg)
EAS00061
CHECKING THE IGNITION TIMING
NOTE:
@
Prior to checking the ignition timing, check the
wiring connections of the entire ignition sys-
tem. Make sure all connections are tight and
free of corrosion.