A SERVICE OF

logo

109
Printer Configuration and Adjustment
User Menus—RFID Menu
4/8/14 ZT400 Series™ User Guide P1066582-002
Perform an RFID Test
During the RFID test, the printer attempts to read and write to a
transponder. No printer movement occurs with this test.
If you wish to test an RFID label:
1. Position the RFID label with its transponder over the RFID
antenna array.
2. Press RIGHT SELECT to select START.
The results of the test are shown on the display.
See RFID Test on page 80 for more information.
Display or Change the RFID Programming Position
This menu item displays the current programming position. If the
desired programming position is not achieved through RFID tag
calibration, a value may be specified.
See Programming Position on page 81 for more information.
Display or Change the RFID Antenna Element
This menu item displays the RFID antenna element in use. If the
desired antenna element is not selected through RFID tag
calibration, a value may be specified.
See RFID Antenna Element on page 81 for more information.
Display or Change the RFID Read Power
This menu item displays the current read power setting. If the
desired read power is not achieved through RFID tag calibration, a
value may be specified.
See RFID Read Power on page 82 for more information.
Display or Change the RFID Write Power
This menu item displays the current write power setting. If the
desired write power is not achieved through RFID tag calibration,
a value may be specified.
See RFID Write Power on page 82 for more information.
RFID TEST
READ OK
WRITE OK
START
RFID PROGRAM POS.
F0
RFID ANTENNA
A1
RFID READ POWER
16
RFID WRITE POWER
16