4
Windows 2000 Users:
A few seconds after startup, you
may see the
Digital Signature Not Found
dialog box.
You can safely ignore this message and click
Yes
.
Continue below with
Completing the Installation
.
Windows XP Users:
When the
Found New Hardware
Wizard
dialog box appears, click
Next
. You may see a
disclaimer box regarding Windows logo testing. You can
safely disregard this message and click
Continue
Anyway
. Continue with
Completing the Installation
.
Completing the Installation
1
Open
Control Panel
(and, in
Windows XP
only, click
Printers and Other Hardware
). Then double-click the
Modems
or
Phone and Modem Options
icon.
2
You may be asked to fill out
Location Information
if you
have not had a modem installed previously. Type the
required information and, when done, click
OK
or
Close
.
Windows XP and Windows 2000 Users:
Click the
Modems
tab, under
Phone and Modem Options
, to
proceed to Step 3.
3
Select the entry for your new modem and then click
Properties
.
4
Set the
Maximum speed
to the highest speed available
(115,200).
Windows XP Users:
You have to click the
Modem
tab
before you can set the
Maximum speed
.
Click
OK
and close the currently open dialog box.
5
Click the
Diagnostics
tab. In
Windows XP
, click
Query
Modem
. Select the port next to the entry for your new
modem (for example,
COM3
) and click
More info
or
Query Modem
. This step tests the modem by querying it
with
AT
commands. A list of responses means that your
new modem is properly connected.
CONGRATULATIONS!
You have successfully installed your PCI
modem.
Installing the Communications Software
, described
below, is optional. For removal instructions, see page 6.
