A SERVICE OF

logo

Open as PDF
next previous
Prestige 642R Series ADSL Router
IPX Configuration 6-3
6.2 Prestige 642R in an IPX Environment
There are two scenarios in which your Prestige is deployed, depending on whether there is a NetWare
server on the LAN, as depicted in the following diagram.
Figure 6-2 Prestige in an IPX Environment
6.2.1 Prestige 642R on LAN With Server
If your Prestige is on a LAN with a seed router, you do not need to configure the LAN network numbers.
Your Prestige will learn the network number from the seed router and add the routes to its routing table.
6.2.2 Prestige 642R on LAN Without Server
Each IPX network must have a seed router. If you only have NetWare clients on your network, then you
must configure the Prestige as a seed router and set up unique network numbers for each frame type enabled
using Ethernet Setup menu.