ZyWALL 5/35/70 Series User’s Guide
Chapter 7 WAN Screens 150
Figure 59 Traffic Redirect LAN Setup
7.14 Configuring Traffic Redirect
To change your ZyWALL’s traffic redirect settings, click NETWORK, WAN and then the
Traffic Redirect tab. The screen appears as shown. Not all fields are available on all models.
Figure 60 Traffic Redirect
The following table describes the labels in this screen.
Table 42 Traffic Redirect
LABEL DESCRIPTION
Active Select this check box to have the ZyWALL use traffic redirect if the normal WAN
connection goes down.
Backup
Gateway IP
Address
Type the IP address of your backup gateway in dotted decimal notation. The ZyWALL
automatically forwards traffic to this IP address if the ZyWALL's Internet connection
terminates.
Check WAN IP
Address
Configuration of this field is optional. If you do not enter an IP address here, the
ZyWALL will use the default gateway IP address. Configure this field to test your
ZyWALL's WAN accessibility. Type the IP address of a reliable nearby computer (for
example, your ISP's DNS server address).
