Filter
Top Products
Connect the First Computer to the Gateway
5
USB Connection
Note: The 2Wire 2070B gateway does not include USB support. If you are using a 2Wire 2070B
gateway, skip this section.
Figure 3. Gateway Connected Via USB
1.
Connect the provided AC power adapter from the 2Wire gateway’s POWER port to an electrical outlet.
The
POWER light on the front of the gateway should be green.
2. Connect the provided blue USB cable from the gateway’s USB port to the USB port on your computer.
3. Connect the provided gray telephone cable from the gateway’s PHONE LINE port to a telephone jack with
DSL service.