Filter
Top Products
10-Port 100BASE-FX and 20-Port 10/100BASE-TX Fast Ethernet Layer 2 Switching Modules Quick Start Guide
21
Managing the
Module
You configure and manage a FEN Switching Module using several
interfaces. The following sections describe two of the interfaces.
Administration Console
The Administration Console is the embedded menu-driven command line
interface that you access from a terminal or through terminal emulation
software.
To manage the module from the Administration Console:
1
Log in to the EME.
For information about how to log in to the EME, see the CoreBuilder
9000 Enterprise Management Engine User Guide.
2
At the EME prompt, enter:
connect <slot>.1
where <slot> is the chassis slot number of the module that you want to
manage, and the number after the decimal point is a subslot number,
which is always 1.
The top level of the Administration Console menu for the module
appears.
3
Enter command strings to manage the module. For example, to display a
module baseline, enter:
module baseline display
For information about the Administration Console module commands,
see the Command Reference Guide.
Web Management
Web Management applications are an embedded part of the system.
They include WebConsole, DeviceView, and Performance monitoring
tools. Additional installable applications include online Help.
After you have set up the IP address for your system, you can access the
Web Management applications directly in your Web browser by entering
the IP address.
For information about setting up your IP address, see the Enterprise
Management Engine Quick Start Guide for the CoreBuilder 9000
Enterprise Switch. For additional information about Web Management,
see the Web Management User Guide for the CoreBuilder 9000
Enterprise Switch.