3Com 100BASE-FX Switch User Manual


 
E
MISSIONS
C
OMPLIANCE
S
TATEMENTS
FOR
C
LASS
A
P
RODUCTS
Federal Communications
Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his or her own expense.
Canadian Emissions
Requirements
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
VCCI Class A Compliance
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information
Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise.
When such trouble occurs, the user may be required to take corrective actions.
EMC D
IRECTIVE
S
TATEMENT
EMC Directive Compliance This equipment was tested and found to conform to the Council Directive 89/336/EEC for electromagnetic
compatibility. Conformity with this Directive is based upon compliance with the following harmonized standards:
Warning
: This is a Class A product. In a domestic environment, this product may cause radio interference, in which
case you may be required to take adequate measures.
L
OW
V
OLTAGE
D
IRECTIVE
S
TATEMENT
Low Voltage Directive
Compliance
This equipment was tested and found to conform to the Council Directive 72/23/EEC for safety of electrical
equipment. Conformity with this Directive is based upon compliance with the following harmonized standard:
G
ENERAL
A
PPROVAL
S
TATEMENT
FOR
UK
UK General Approval Statement This equipment is manufactured to the international Safety Standard EN60950 and is approved in the UK under the
General Approval Number NS/G/12345/J/100003 for indirect connection to the public telecommunication network.
A
USTRALIAN
EMC
F
RAMEWORKS
S
TATEMENT
Australian EMC Frameworks
Compliance
This product conforms to the EMC Frameworks and meets the Class A limits of AS3548.
EN 55022 Limits and Methods of Measurement of Radio Interference
EN 50082-1 Electromagnetic Compatibility Generic Immunity Standard:
Residential, Commercial, and Light Industry
EN 60950 Safety of Information Technology Equipment