Filter
Top Products
2
I
NSTALLATION
This chapter contains PCI Dual 10/100Base-T Ethernet Network Interface
Card (NIC) installation information.
Installation Tools
To install this NIC in the Total Control chassis, you need a #2 Phillips and
flat-head screwdriver.
Installation
Procedure
To install this NIC:
ESD:
To reduce the risk of electrostatic discharge (ESD), take proper
grounding precautions before handling the NIC.
Install the NIC with or without power applied to the chassis.
1
Configure the NIC via the jumper and switches. Put the jumper in the
NAC position. Refer to the following graphic for more information.
This NIC
must
be configured with the jumper in the
NAC
position in
order to function properly.