3Com 16985ua.bk Switch User Manual


 
Important Safety Information 35
France and Peru only:
This unit cannot be powered from IT supplies. If your supplies are of
IT type, this unit must be powered by 230V (2P+T) via an isolation
transformer ratio 1:1, with the secondary connection point labelled
Neutral, connected directly to earth (ground).
Impédance à la terre.
U.K. only:
The Switch 3300 MM is covered by Oftel General Approval,
NS/G/12345/J/100003, for indirect connection to a public
telecommunications system. This can only be achieved using the
console port on the unit and an approved modem.
Sockets for Redundant Power System (RPS):
Only connect an
Advanced Redundant Power System (3C16071B)
with Type 2A Power Modules and Type 2 cables to the
Redundant
Power System
socket.
WARNING: RJ-45 Ports.
These are shielded RJ-45 data sockets. They
cannot be used as telephone sockets. Only connect RJ-45 data
connectors to these sockets.
Either shielded or unshielded data cables with shielded or unshielded
jacks can be connected to these data sockets.
16985ua.bk Page 35 Thursday, September 7, 2000 9:15 AM