Filter
Top Products
Power Module 29
Figure 25 Front Panel of the 1-Port 10GBASE-R-XENPAK Module
1 XENPAK port
2 XENPAK port LEDs
Table 36 describes the 1-port 10GBASE-R-XENPAK module LEDs.
Table 37 lists specifications of the 1-port 10GBASE-R-XENPAK module.
Power Module Only one AC power module is required for the 4-slot chassis, although two power
module slots are provided to implement N+1 redundancy.
The 7-slot chassis provides three power module slots to implement N+1
redundancy. However, two power modules are sufficient to power one of these
fully loaded Switch 7750 systems.
Table 36 1-Port 10GBASE-R-XENPAK Module LEDs
LED Description
LINK On — The port is operating
Off — The port is not operating
ACT Off — No data is being transmitted
Green flashing — Data is being transmitted
Table 37 Specifications for the 1-Port 10GBASE-R-XENPAK Module
Specification Description
CPU MPC8245
BootROM 512 KB
SDRAM 64 MB
Dimensions (L x W) 366.7 x 340 mm (14.5 x 13.4 in)
Power consumption 35 W
Connector SC
Number of ports 1
Transmission rate 10 Gbps full duplex
Cable and maximum
transmission distance
10GBASE-LR-XENPAK (single mode optical fiber, 1310 nm 10 km)
10GBASE-ER-XENPAK (single mode optical fiber, 1550 nm 40 km)
Compliance IEEE 802.1p
IEEE 802.1Q
IEEE 802.1D
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ad
IEEE 802.3ae
3C16875
12