Filter
Top Products
Installation Planning
74
To ensure proper horizontal cabling functionality, adhere to the
following standards during installation:
■ ANSI/TIA/EIA-568
Commercial Building Telecommunications Cabling Standard
■ ANSI/TIA/EIA-569
Commercial Building Standard for Telecommunications
Pathways and Spaces
■ BRITISH STANDARD INSTITUTE (BSI): BS 4664:1970 (1986)
The network cabling at your site (from the wiring closet to the
wall or cubicle opening) may already be installed. If it is not,
install the cabling following these general guidelines.
WARNING: The NJ205 is designed to be
mounted using the provided mounting plate or
many after-market faceplates. However, some
after-market faceplates stand out from the wall
and do not provide a secure mounting surface
for the IntelliJack. In such cases, it is
recommended to place the 3Com spacer
between the IntelliJack and the after-market
face plate.
CAUTION: It is recommended that a professional
cable installer perform these procedures. Be sure to
adhere to local safety and regulatory codes during
the cable installation.