3Com 3CREB96B Network Card User Manual


 
INDUSTRY CANADA NOTICE
(A
PPLICABLE FOR USE WITHIN
C
ANADA)
This device complies with Canadian RSS-210.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to
provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in
excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website
www.hc-sc.gc.ca/rpb.
AVIS DE CONFORMITÉ À LA
RÉGLEMENTATION
DINDUSTRIE CANADA
Cet appareil est conform à la norme CNR-210 du Canada.
Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, cet appareil doit être utilisé à
l’intérieur seulement et devrait êtra placé loin des fenêtres afin de fournir un écran de blindage maximal.
L’installateur du présent matériel radio doit s’assurer que l’antenne est située ou pointée de manière à ce que cette derniére
n’émette pas de champs radioélectriques supérieurs aux limites spécifiées par Santé Canada pour le grand public; condulter le
Code de sécurité 6, disponible sur le site Web de Santé Canada, à l’adresse suivante: www.hc-sc.gc.ca/rpb.
SAFETY This device has been tested and certified according to the following safety standards and is intended for use only in Information
Technology Equipment which has been tested and certified to these or other equivalent standards:
n UL Standard 60950 (3rd Edition)/ CSA C22.2 No. 60950
n IEC 60950
n EN 60950
EUROPEAN COMMUNITY CE
N
OTICE
Marking by the symbol indicates compliance of this equipment to the R&TTE Directive 1999/5/EC. Such marking is
indicative that this equipment meets or exceeds the following technical standards:
n ETS 300 328 — Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data
transmission equipment operating in the 2,4GHz ISM band and using spread spectrum modulation techniques
n ETS 301 489-17— Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC)
standard for radio equipment and services; specific coniditions for Wideband data and High PErformance Radio Local Area
Network (HIPERLAN) equipment
n EN 60950 — Safety of information technology equipment, including electrical business equipment
This device may be used throughout the European Community.
NOTE: Due to frequency restrictions it is necessary to select your country before using this radio device. Refer to your
3Com Wireless LAN Manager online help for details.