Filter
Top Products
144 CHAPTER 7: MANAGING AND MONITORING YOUR NETWORK
Deploy Your
Configuration
Any changes you make to your network in 3WXM are saved when you
save the network plan on the server, but the changes are not applied to
your network until they are deployed. You see the changes in 3WXM, but
the changes are only local to 3WXM.
When you deploy the configuration, you send the configuration from
3WXM to a live WX switch. This method makes it easy to apply a
configuration to multiple WX switches, or to deploy changes to a single
WX switch.
To deploy the configuration in your network plan to the WX switch:
1 From the 3WXM main menu bar, select Manage > Deploy. The Deploy
Configurations wizard is displayed.
2 Select the WX switch configuration you want to deploy. Verification is
done on the configuration.
If errors or warnings are identified during verification, a message is
displayed at the bottom of the window. After closing the Deploy wizard,
click Configuration in the Alerts panel. The Config Verification tab is
displayed. From there, you can correct errors or specify that 3WXM
ignore the errors.
3 Click Deploy Now to deploy the configuration.