Filter
Top Products
Configure Voice over Wireless IP Service 85
Example: Creating an ACL for SpectraLink Wireless Phones
The following example illustrates how to define an ACL on a WX switch
in an environment where SpectraLink® wireless phones are used.
To define an ACL on a WX switch and add ACEs:
1 Expand the WX switch icon in the Organizer panel; right-click on
ACLs > Insert > ACL. The Create ACL wizard is displayed.
2 Enter the name for the ACL in the ACL Name field.
3 Click New. Select New L4 Protocol ACE. Create an ACE that matches
the SVP protocol (SpectraLink’s proprietary protocol).
Select 7 for the CoS value to map the ACL to an elevated priority.
If Wi-Fi Multimedia (WMM) support is disabled, use 6 or 7 for SVP, and
use 4 or 5 for other VoWIP types. When WMM is disabled, the MAP
forwarding queue that maps to CoS values 6 and 7 is optimized for SVP.
If WMM support is disabled, use 6 or 7 for all types of VoWIP.
Select 119 for the Protocol ID value (representing the SVP protocol).
Click Finish. The Create ACL wizard is displayed again.