Filter
Top Products
3 - 4 ONline Ethernet 24-Port 10BASE-T Module Installation Guide
Unpacking Procedures
When unpacking your 24-Port Module:
1. Verify that the 24-Port Module is the model you ordered by checking
the model number listed on the side of the shipping carton (Model
Number 5124M-TPCL or Model Number 5124M-TP).
Note that the product model number printed on the shipping box
differs from the model number on the product. The model number
on the shipping box contains the prefix ’3C9’.
2. Remove the module from the shipping carton.
3. Remove the module from the antistatic shielding bag and inspect it
for damage. If the module appears to be damaged, replace it in the
antistatic shielding bag, return it to the shipping carton, and contact
your local supplier.
4. Keep the shipping carton and antistatic shielding bag in which your
module was shipped for repackaging the module for storage or
shipment.
5. Record the serial number of your 24-Port Module. A log for this and
other information specific to your modules is included in the ONline
System Concentrator Installation and Operation Guide, Appendix B,
Slot Usage Chart.
Setting the DIP Switches
This section describes:
❑ DIP Switch Overview
❑ DIP Switch Description