Filter
Top Products
INSTRUCTIONS FOR WALL-MOUNTING THE CABLE MODEM
1
Remove this template from
this
Installation Guide
.
4
Secure the screws in the starter
holes, leaving at least 1/4" (6mm)
clearance.
3
Insert pushpins into the
cross hairs on the template.
2
Place the template at least 20" (50 cm)
above and parallel to the floor.
INSTRUCTIONS FOR WALL-MOUNTING THE CABLE MODEM
Wall-mounting Template
See other side for basic instructions.
For complete instructions, see the
User's Guide & Reference
.
INSTRUCTIONS FOR WALL-MOUNTING THE CABLE MODEM
Wall-mounting Template
See other side for basic instructions.
For complete instructions, see the
User's Guide & Reference
,
20"
[50 cm]
INSTRUCTIONS FOR WALL-MOUNTING THE CABLE MODEM
Wall-mounting Template
See other side for basic instructions.
For complete instructions, see the
User's Guide & Reference
.
1/4"
[6 mm]
Starter hole
Screw
5
Attach the cables.
CATV
SERIAL
10 BT
power supply
(to wall outlet)
cable line (to cable
outlet)
RJ-45 cable
(to NIC)
6
Fit the mounting holes over the screw heads
and slide the unit down until it locks in place.
Screws
®
®