Filter
Top Products
Remote S Registers B-9
S70 Dynamic Bandwidth Allocation:
0 — DBA disabled
1 — DBA enabled (default)
S71 B Channel Protocol:
0 — QuickSelect (default)
1 — Async-Sync PPP conversion
2 — V.120
S73 V.120 Frame Type:
0 — I frame (default)
1 — UI frame
S74 V.120 Maximum Frame Size (range 240–256):
256 — Maximum frame size of 256 is used (default)
248 — Maximum frame size of 248 is used (for AdTran
â
compatibility, use 253)
S80 Multilink PPP:
0 — Disable
1 — Enable (default)
S81 Multilink PPP Directory Number:
If the destination to which you are dialing a Multilink PPP
call requires two separate directory numbers, you must
include the second telephone number of up to 15 digits in
this S register. If left blank, then the number used to dial the
first link is used.
S82 Multilink PPP Endpoint Identifier Class:
If required, this information is provided by your Internet
service provider.
1 — Locally Assigned Address
2 — Internet Protocol (IP) Address
3 — IEEE 802.1 Globally Assigned MAC Address
4 — PPP Magic-Number Block
5 — Public Switched Network Directory Number
S83 Multilink PPP Endpoint Identifier (up to 20 characters)
If required, this information is provided by your Internet
service provider.
Table B-3 Remote S Registers (continued)
Registers Descriptions