Filter
Top Products
Hardware Features 17
WXR100 LEDs Figure 5 shows the locations of the WXR100 LEDs. Table 5 describes the
LEDs.
Figure 5 WXR100 LEDs
MAP
(WX1200 only)
Solid green For a MAP access point’s active link, with
PoE enabled, all the following are true:
MAP access point has booted.
MAP access point has received a valid
configuration from the WX switch.
Management link with a MAP access
point is operational.
Alternating green
and amber
MAP access point is booting with an image
received from the WX switch.
If the LED remains in this state indefinitely,
the boot or configuration attempt has
failed.
Solid amber PoE is on but no MAP access point is
connected to the link.
Blinking amber MAP is not connected or is unresponsive,
or there is a PoE problem.
Unlit Port is not configured as a MAP access
port, or PoE is off.
Table 4 WX1200, WX4400, and WX2200 Status LEDs (continued)
LED Appearance Meaning
Power
supply LED
1
2
FN LED
MAP LED
Link LED