3M H10 Projector User Manual


 
36
Other Care
WARNING Please carefully read the “Product Safety Guide”.
• Before replacing the air filter, make sure the power switch is off and the power cable
is not plugged in.
ATTENTION
• Do not use cleaners or chemicals other than those listed below,
including benzene and paint thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
Caring For The Inside Of The Projector
Caring For The Lens
In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years. Never try to care for the inside of the unit
yourself. Doing so is dangerous.
1
Turn off the projector, and unplug the
power cord.
2
Lightly wipe the lens with a
commercially available lens-cleaning
wipe. Do not touch the lens directly
with your hand.
Caring For The Cabinet And Remote Control
1
Turn off the projector, and unplug the power cord.
2
Wipe lightly with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and
wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
Lens