Filter
Top Products
3M
™
Pocket Projector MP160
10 © 2010 3M. All Rights Reserved.
English
Getting Started
Install Battery
The 3M Pocket Projector MP160 comes with a rechargeable battery. The battery
should be fully charged before using the projector with the battery.
To install the battery: point the contacts on the battery toward the contacts on the
projector, insert the end farthest from the battery latch first, then push down until
the battery clicks into place.
Remove Battery
To remove the battery: slide the battery latch away from the battery and then lift the
battery out, starting at the end closest to the latch.
Important Note: Use only the 3M specified battery: 78-6972-0026-5.